Hemingray.info
 
CD 1080
Insulator Facts

Dimensions:1 7⁄8" H × 1 1⁄2" W
Primary Embossings:The Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
Years Produced: c.1910s
Rarity Scale 0. No specimens known
1. Extremely Common (millions known)
2. Very Common
3. Common
4. Fairly Common
5. Uncommon
6. Very Uncommon
7. Rare (dozens known)
8. Very Rare (less than a dozen known)
9. Extremely Rare (2 or 3 known)
10. Unique (only one known)
Fairly Common (4/10)
Usage: Break Knob Spool
Weight:Weight is an average only (or as specified in original catalogs.) Weight may vary substantially depending on many factors, including amount of glass poured, depth of the threads, mold variations, added hardware such as brass or lead bushings, etc.
3.5 oz.
Value Range: This is an estimated value range only, based on historical hobby collecting data. Insulator values vary widely depending on many factors, including embossing, color, condition, mold variations, manufacturing anomalies, and other attributes. Please visit the Hemingray Values page for more information.
$15-200
Insulator Overview

This is a small, unembossed Hemingray break knob spool. Its style number was originally №1½, and later renumbered to №101. Despite the catalog drawings showing these embossed with "Hemingray", no embossed versions are known to exist. Based on design similarities and height variations of CD 1085, this style is often confused with CD 1085. This style also comes in a variety of heights due to how it was manufactured, and has been found with both flush and recessed bases.
Known Embossings (3)
Primary EmbossingThe Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
EINThe Embossing Index Number (EIN) is a unique number assigned by the collecting hobby to each distinct embossing for an insulator design. It is normally shown in brackets, e.g. [050].
EmbossingMost common terms:
(F-Skirt): Front Skirt
(R-Skirt): Rear Skirt
/: New line of embossing
{}: Special note (not embossed on the insulator)
[#]: Represents a number

Other terms:
{MLOB}: Mold Line Over Base
(F-Crown): Front Crown
(R-Crown): Rear Crown
(F-Umbrella): Front Umbrella
(R-Umbrella): Rear Umbrella
BaseThe base is the bottom of the insulator. Hemingray made 4 different types of bases:

1. SDP: Sharp Drip Points
2. RDP: Round Drip Points
3. CB: Corrugated Base
4. SB: Smooth Base
Year AddedThis is the year that this embossing was officially recognized and added to the McDougald (1991-2008) or Briel (2011-2023) insulator price guides. It is not necessarily the year this embossing was discovered.
Photo
Status = In my collection

If the value in this column says WANTED, then that specific insulator is on my wanted list! If you have that insulator and would like to sell it, click on the WANTED link to submit photos and contact me.
NO EMBOSSING [010] [No embossing] SB - Photo
S.B.T.&T.CO. [010] (F-Skirt) S.B.T.& T.Co.
Note: I believe this is a duplicate and should be removed from the price guide. See CD 1085.
Note: This embossing is a suspected, but unconfirmed, Hemingray product.
SB - No Photo
S.S.&CO. [010] (Inside of base) S.S.& CO./35
Note: I believe this should be moved under CD 1085.
Note: This embossing is a suspected, but unconfirmed, Hemingray product.
SB - No Photo
Removed Embossing

The following embossing(s) were removed from the price guide because they could not be verified to exist, were consolidated with other embossings, or were otherwise ambiguous/inaccurate. They are preserved here for historical purposes.

Primary EmbossingThe Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
EINThe Embossing Index Number (EIN) is a unique number assigned by the collecting hobby to each distinct embossing for an insulator design. It is normally shown in brackets, e.g. [050].
EmbossingMost common terms:
(F-Skirt): Front Skirt
(R-Skirt): Rear Skirt
/: New line of embossing
{}: Special note (not embossed on the insulator)
[#]: Represents a number

Other terms:
{MLOB}: Mold Line Over Base
(F-Crown): Front Crown
(R-Crown): Rear Crown
(F-Umbrella): Front Umbrella
(R-Umbrella): Rear Umbrella
BaseThe base is the bottom of the insulator. Hemingray made 4 different types of bases:

1. SDP: Sharp Drip Points
2. RDP: Round Drip Points
3. CB: Corrugated Base
4. SB: Smooth Base
Year Removed
E.S.G.CO. [010] (F-Skirt) E.S.G. OC {Note 'C' is backwards}
Note: This embossing was removed from the 2019 edition of the price guide as it was likely a mis-reading of the CD 1085 ESG [020] embossing.
SB 2019
Known Colors (5)
ColorThe color of the insulator.
Aqua
Blue
Ice Aqua
Light Aqua
Yellow Green