Hemingray.info
 
BT 2132
№132 Floor Tube
Insulator Facts

Dimensions:6" Long
Bore Size:The bore is the inner hole diameter of a bushing or floor/wall tube insulator, and is often tapered so that one end is wider (max) than the other (min). Hemingray measured the bore of their floor/wall tube insulators on the smallest (minimum) end.
1" (min)
Primary Embossing:The Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
NO EMBOSSING
Years Produced: c.1893-c.1918
Rarity Scale 0. No specimens known
1. Extremely Common (millions known)
2. Very Common
3. Common
4. Fairly Common
5. Uncommon
6. Very Uncommon
7. Rare (dozens known)
8. Very Rare (less than a dozen known)
9. Extremely Rare (2 or 3 known)
10. Unique (only one known)
Rare (7/10)
Usage: Floor Tube
Weight:Weight is an average only (or as specified in original catalogs.) Weight may vary substantially depending on many factors, including amount of glass poured, depth of the threads, mold variations, added hardware such as brass or lead bushings, etc.
19.0 oz.
Value Range: This is an estimated value range only, based on historical hobby collecting data. Insulator values vary widely depending on many factors, including embossing, color, condition, mold variations, manufacturing anomalies, and other attributes. Please visit the Hemingray Values page for more information.
$150-350
Insulator Overview

This is Hemingray's No. 132 Floor Tube design, known as the "split plain" style. It is two pieces, 6 inches long, and has a 1 inch bore. Each piece has 3 protrusions (which almost resemble drip points), and they fit into three matching indentations on the other side. These act as a "tongue and groove" design to keep the two pieces together when inserted into the wall or floor. This unique 2 piece design allowed for a tube to be installed around an existing line (or I would imagine as a potential replacement if a previous tube was broken). Darin Cochran has dug shards of these from the Hemingray dump. There are at least 3 complete specimens known to date.
Known Embossing
Primary EmbossingThe Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
EINThe Embossing Index Number (EIN) is a unique number assigned by the collecting hobby to each distinct embossing for an insulator design. It is normally shown in brackets, e.g. [050].
EmbossingMost common terms:
(F-Skirt): Front Skirt
(R-Skirt): Rear Skirt
/: New line of embossing
{}: Special note (not embossed on the insulator)
[#]: Represents a number

Other terms:
{MLOB}: Mold Line Over Base
(F-Crown): Front Crown
(R-Crown): Rear Crown
(F-Umbrella): Front Umbrella
(R-Umbrella): Rear Umbrella
BaseThe base is the bottom of the insulator. Hemingray made 4 different types of bases:

1. SDP: Sharp Drip Points
2. RDP: Round Drip Points
3. CB: Corrugated Base
4. SB: Smooth Base
Year AddedThis is the year that this embossing was officially recognized and added to the McDougald (1991-2008) or Briel (2011-2023) insulator price guides. It is not necessarily the year this embossing was discovered.
Photo
Status = In my collection

If the value in this column says WANTED, then that specific insulator is on my wanted list! If you have that insulator and would like to sell it, click on the WANTED link to submit photos and contact me.
NO EMBOSSING [010] [No embossing] {Tongue and groove design: insulator is split into two pieces with 3 protrusions on one side and 3 matching indentations on the other side} {Hemingray product} SB - No Photo
Removed Embossing

The following embossing(s) were removed from the price guide because they could not be verified to exist, were consolidated with other embossings, or were otherwise ambiguous/inaccurate. They are preserved here for historical purposes.


Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 806

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 807

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 808

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 809

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 810

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 811

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 812

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 813

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 814

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 815

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 816
Primary EmbossingThe Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
EINThe Embossing Index Number (EIN) is a unique number assigned by the collecting hobby to each distinct embossing for an insulator design. It is normally shown in brackets, e.g. [050].
EmbossingMost common terms:
(F-Skirt): Front Skirt
(R-Skirt): Rear Skirt
/: New line of embossing
{}: Special note (not embossed on the insulator)
[#]: Represents a number

Other terms:
{MLOB}: Mold Line Over Base
(F-Crown): Front Crown
(R-Crown): Rear Crown
(F-Umbrella): Front Umbrella
(R-Umbrella): Rear Umbrella
BaseThe base is the bottom of the insulator. Hemingray made 4 different types of bases:

1. SDP: Sharp Drip Points
2. RDP: Round Drip Points
3. CB: Corrugated Base
4. SB: Smooth Base
Year Removed
n/a
Known Color
ColorThe color of the insulator.
Light Aqua